|
|
|
CTS01 Compression - Tension - Sensor
|
 | |
The compression-tension-sensors CTS were developed for the precise measurement of forces, which works in axial direction. For this purpose, the outer ring is flanged to the mounting surface and the force passes into the centre bore. The force sensor function according to the membrane principle to which full bridge strain gauges are applied. The sensor elements captures the elongations in the membrane and transform them into electrical signals proportional to the force.
HAEHNE offers for all its sensors a corresponding range of amplifiers, e.g. the measuring amplifier MV125, to condition the measuring signal and deliver the bridge voltage supply.
Due to the design principle applied the measuring errors remain negligibly small even in case of extreme eccentrically acting forces. |
| |
|
| Features |
- Low profile
- For dynamic and static force measurement in compression-tension range
- Made of stainless steel
|
| Nominal force Fnom (Measuring range): |
20 kN |
| Operating force based on Fnom: |
250 % |
| Absolute max. force based on Fnom: |
1000 % |
| Nominal rating: |
1 mV/V |
| Combined Error: |
0.5 % |
| Nominal ambient temperature: |
283... 333 K |
| Nominal ambient temperature: |
263... 343 K |
| Enclosure protection: |
IP 67 |
|
|
|
|
|
|
|
|
|
|
